DHW heat pumps
WWK 301 electronic SOL
- DHW heat pump
- Compact series for recirculation air or air duct/outdoor air operation
- 292 l cylinder capacity
- SOL version additionally with integral heat exchanger for connection of an external heat generator (e.g. solar thermal or existing heating system)
- Achieves the highest possible energy efficiency: A+
- High degree of flexibility regarding siting and installation
- Hygienic DHW temperatures up to 65 °C achievable in heat pump mode only
- SmartGrid – future-oriented technology
Questions about the productGet contact
Product detailsThe fully wired WWK 301 electronic SOL DHW heat pump enables efficient DHW provision for several draw-off points in conjunction with the use of renewable energy. The compact appliance can be installed quickly and easily as a recirculation air unit, to make efficient use of existing waste heat, e.g. from freezers, tumble dryers, heating systems or other heat generators. Alternatively, they can also be installed wherever required with a duct connection for utilising outdoor air as a heat source. The variety of air routing options at the appliance, to the side and/or from above (for air routing from "above", the "LUS 221/301" accessory is required), provides great flexibility in terms of positioning and installation in the installation room. The attractively designed, highly efficient heat pump with an optimally insulated cylinder achieves excellent performance values. The high level of operating convenience offered by the control unit with LCD provides the finishing touch. Information such as the amount of mixed water currently available at +40 °C can be called up in an instant. The high quality equipment includes a maintenance-free impressed current anode and an emergency booster heater. The built-in contact input enables the integration of external signal transmitters, for example a photovoltaic system, to utilise solar power generated on site (requires selected inverter), or, where possible, an off-peak tariff signal.
Please ask your local power supply utility or a registered electrician to install appliances that are not fully wired, i.e. ready to plug in. The electrician should also be able to assist you with obtaining the agreement of the respective power supply utility required for the appliance installation.