Brine-water heat pumps
HPG-I 12 S Premium
- Ground source heat pump for heating
- Optimum operation and maximum efficiency all year round thanks to inverter technology
- High flow temperatures of up to 75 °C for energy efficient heating and high mixed water volumes
- Futureproof and eco-friendly refrigerant
- Optional integration into the home network and control via smartphone
Questions about the productGet contact
Product detailsAPPLICATION: Inverter ground source heat pump with output-dependent control, designed for indoor installation with a high level of integration. Can be used in mono mode to provide heating and DHW. Ideal for installation in new build and modernisation due to very high flow temperatures. Also suitable for apartment buildings, depending on the heat load of the building.
EQUIPMENT/CONVENIENCE: Optimised noise reduction due to encapsulated refrigerant circuit and acoustically isolated compressor. Due to the consistent source temperature, a constant heating output with high flow temperatures up to 75 °C is guaranteed all year round. The integral heat pump controller enables fully automated, weather-compensated control of the heating system and, when combined with the optional ISG, the ability to control the system via a home network or a mobile terminal device. With integral heat and electricity metering via refrigerant circuit data. A high efficiency circulation pump and expansion vessel are provided for both the brine side and the heating side. An electric emergency/booster heater for mono energetic operation and pasteurisation, a diverter valve for DHW heating and a safety valve with discharge hose are integrated as standard. The refrigerant circuit works with the eco-friendly and futureproof refrigerant R454C. It has optimum properties for heat pump applications.
EFFICIENCY: The integral inverter ensures optimum heat pump operation all year round and consequently maximum efficiency. Thanks to the built-in recuperator, efficiency can be maintained at a high level all year round.
INSTALLATION: Due to the integrated safety concept, no special measures are necessary when installing the appliance. Only a minimum room size must be ensured. Internal pressure hoses enable direct hydraulic connection to the heating and brine circuits. For easy installation, the hydraulic connections are equipped with quick-release fittings and are already thermally insulated. The metal casing is corrosion-protected and made from galvanised, powder coated sheet steel, with an alpine white stove enamel finish. Carrying handles on the back panel facilitate appliance handling.
Please ask your local power supply utility or a registered electrician to install appliances that are not fully wired, i.e. ready to plug in. The electrician should also be able to assist you with obtaining the agreement of the respective power supply utility required for the appliance installation.