Small water heaters 5 to 15 l
SHC 10 GB Eltron
- Quick DHW availability without delay
- Suitable safety valve included in standard delivery
- Power cable for permanent connection, approx. 1 m
- Appliance versions with 10 or 15 litre capacity
Questions about the productGet contact
Product detailsAPPLICATION: SHC GB cylinders are suitable for supplying DHW to several draw-off points with low DHW demand. Pressure-tested appliance for use with all commercially available pressure fittings. Installation only with the appropriate safety valve. Undersink installation.
EQUIPMENT AND CONVENIENCE: Tailored solutions for decentralised group supply. Undersink water heaters heat the water directly at the draw-off point. Energy and water losses due to long pipe runs are avoided. No circulation losses. Low energy losses thanks to high grade thermal insulation. Warm or hot water available at any time. Temperature controller with temperature capture immersed directly in the water. Variable temperature selection from 30 - 65 °C via rotary selector. Temperature limit at 38 °C and 49 °C, plus automatic frost protection setting when the appliance is off. Heat-up signalled by an indicator lamp. Pressure-tested internal steel cylinder with protective magnesium anode. High quality EPS thermal insulation for low energy losses.
INSTALLATION AND SERVICE: PROFI-RAPID installation system for even quicker and simpler installation. Simple wall mounting with universal mounting rail as standard. Installation template included in standard delivery. Threaded metal water fittings for secure connection. Suitable safety valve, tee and locking ring fitting (G1/2 x 15 mm) included in standard delivery. Protection rating IP 24 (splashproof).
SAFETY AND QUALITY: Robust copper tubular heater with low surface load. Resettable high limit safety cut-out. Mechanical temperature limiting can be set to 38 °C or 49 °C.
Please ask your local power supply utility or a registered electrician to install appliances that are not fully wired, i.e. ready to plug in. The electrician should also be able to assist you with obtaining the agreement of the respective power supply utility required for the appliance installation.