back

Floor mounted cylinder
SHO AC 1000 12 kW

    • Floor mounted cylinder for central DHW heating
    • Perfect for apartment buildings or commercial premises due to the provision of large amounts of DHW
    • Simple temperature selection from 35-85 °C with variable adjustment on the appliance
    • Cost savings possible if cheaper off-peak tariffs are used
    • Thermal insulation available as an optional accessory reduces standby energy consumption
    • Can be used for a high number of draw-off points
    • Special enamel coating for a long service life
    Questions about the product Get contact

    Product details

    Hot water on a grand scale

    Wherever many people come together, there is a greater demand for hot water. To ensure there is always enough to go round, we have developed this floor mounted cylinder with a remarkably high capacity. It is therefore suitable for large households and commercial premises alike.

     

    Benefit from high temperatures

    A further impressive feature is the very high heat-up temperature – the best prerequisite for enormous mixed water volumes. The appliance is therefore more than capable of living up to high demands and creates plenty of feel-good hot water moments too.


    ERP product datasheet
    Reach-Information
    Technical datasheet

    Product Number: 001415

    Connected load ~ 400 V: 12 kW

    Power supply: 3/PE

    Rated voltage: 400 V

    Frequency: 50 Hz

    Energy efficiency class (A+ → F): C

    Standby energy consumption/24 h at 65 °C: 3.70 kWh

    Nominal capacity: 1000 l

    Mixed water amount at 40 °C: 1533 l

    Temperature setting range: 35-85 °C

    Max. flow rate: 45 l/min

    Height: 2525 mm

    Width: 750 mm

    Depth: 1000 mm

    Show all

    Download as PDF

    Equipment datasheet

Installation Information:

Please ask your local power supply utility or a registered electrician to install appliances that are not fully wired, i.e. ready to plug in. The electrician should also be able to assist you with obtaining the agreement of the respective power supply utility required for the appliance installation.