• Product details

    APPLICATION: DCE-S Plus is a space saving compact instantaneous water heater for DHW supply to single or multiple draw-off points, e.g. kitchen sinks or washbasins and hand washbasins. In commercial settings, for utility rooms or for multiple hand washbasins in public sanitary facilities. Suitable for showers with inlet temperatures above 20 °C. Sealed unvented, pressure-tested appliance for use with all commercially available pressure taps.

    EQUIPMENT/CONVENIENCE: Electronically controlled compact instantaneous water heater with 3i technology. Accurate temperature delivery up to the maximum output. Temperature selection from 20 - 60 °C (68 - 140 °F). Infinitely variable manual temperature adjustment via rotary selector.

    EFFICIENCY: Energy and water savings of up to 30 % through electronic output control with 3i technology. 3 sensors ensure that the selected temperature is accurately achieved. For this, only the actual required amount of energy is expended; there is no need to add cold water at the tap. This ensures maximum energy efficiency. No cylinder or line losses. Suitable for preheated water (e.g. in solar thermal and heat pump systems).

    INSTALLATION/SERVICE: PROFI-RAPID installation system for time saving, straightforward installation. Straightforward, stable wall mounting: Direct fitting through the appliance back panel enables easy compensation of drill hole discrepancies. Appliance cover easy to open thanks to central screw. Fast, universal water connection: 1/2" brass water connections, located at bottom for installation on finished walls. Installation on unfinished walls for non-visible water connections is possible with optional accessories. Suitable for plastic pipes (observe manufacturer's instructions). Straightforward and flexible electrical connection: Electrical connection at the bottom on unfinished walls. Electrical connection at the bottom or side on finished walls. Selectable output can be adjusted internally. Protection rating IP 25 (hoseproof). Fault analysis with LED diagnostic lights. Complete inner assembly can be removed from the back panel.

    SAFETY: Rapid bare wire heating system, suitable for hard and soft water. Multi-stage electronic safety concept with air bubble detection. Internally adjustable static temperature limiting to max. 43 °C, 50 °C or 55 °C.



    Available from June 2019

    ERP product datasheet

    Technical datasheet

    Product Number: 238154

    Rated output: 10,0/12,0 kW

    Height: 372 mm

    Width: 217 mm

    Depth: 109 mm

    Show all

    Download as PDF