Mini instantaneous water heater
EIL 7 Premium
Product detailsElectronically controlled mini instantaneous water heater with closed-loop control, outlet temperature sensor and variable flow rate restriction. Accurate temperature delivery up to the maximum output. Internal temperature limit from 30 to 50 °C. Including special aerator for perfect water flow pattern and integral flow meter for fitting in existing taps (M22/24 thread). Anti-scalding protection for high inlet temperatures via automatic output adjustment. Suitable for oversink and undersink installation.
Suitable for DHW supply to one hand washbasin. Can be operated with pressurised or non-pressurised tap. Also suitable for showers with inlet temperatures above 20 °C.
Electronic output control for energy efficient and water saving operation. In conjunction with the control electronics, the outlet temperature sensor ensures the set temperature is achieved with maximum accuracy. For this, only the actual required amount of energy is expended; there is no need to add cold water at the tap. The water is heated directly at the draw-off point and only when required. Minimal energy and water losses thanks to short pipe runs. This ensures maximum energy efficiency. Suitable for preheated water (e.g. in solar thermal and heat pump systems).
Installation system for time saving, straightforward installation. Straightforward wall mounting: Secured at two points; back panel also serves as a drilling template; slots for compensating for drill hole discrepancies; appliance cover and internal assembly can be removed in one step. Fast, universal water connection: External 3/8" metal water connections for direct, universal installation of taps. Easy electrical connection: Prepared power cable as standard; 3.5 kW version with standard plug; other versions for permanent connection. Protection rating IP 25 (hoseproof). Fault analysis with LED diagnostic traffic light.
Maintenance-free bare wire heating system, suitable for hard and soft water. Safety system with high pressure switch and electronic temperature monitoring. Maximum permissible inlet temperature 55 °C, maximum permissible inlet temperature for reheating up to 50 °C.
Please ask your local power supply utility or a registered electrician to install appliances that are not fully wired, i.e. ready to plug in. The electrician should also be able to assist you with obtaining the agreement of the respective power supply utility required for the appliance installation.