DHM 6 220
- Hydraulically controlled mini instantaneous water heater for energy efficient and water saving supply of a single hand wash basin
- Undersink installation
- Can be operated with pressurised and non-pressurised taps
- Special aerator with flow rate limiter for M 22 (fem.) and M 24 (male)
- Instant hot water thanks to rapid and maintenance-free bare wire heating system
- Quick PROFI-RAPID installation
Questions about the productGet contact
Product detailsAPPLICATION: DHM suitable for DHW supply to one hand washbasin. International: Also suitable for showers with inlet temperatures above 20 °C. Operation with pressurised or non-pressurised taps possible.
EQUIPMENT/CONVENIENCE: Hydraulically controlled mini instantaneous water heater with flow switch and automatic flow rate control. Near constant accurate temperature delivery up to maximum output. Hydraulically controlled single stage heating output, subject to flow rate. Required temperature achieved by mixing at the tap. Including special aerator for perfect water flow pattern and integral flow meter for fitting in existing taps (M22/24 thread). Undersink installation.
EFFICIENCY: Mini instantaneous water heaters heat the water directly at the draw-off point only when required. Energy and water losses due to long pipe runs are avoided. This ensures high energy efficiency.
PROFI-RAPID INSTALLATION: PROFI-RAPID installation system for time saving and straightforward installation. Straightforward wall mounting: Secured at two points; back panel also serves as a drilling template; slots for compensating for drill hole discrepancies; appliance cover and internal assembly can be removed in one step. Fast, universal water connection: External 3/8" metal water connections for direct, universal installation of taps. Easy electrical connection: Prepared power cable as standard; 3.5 kW version with standard plug; other versions for permanent connection. Protection rating IP 25 (hoseproof).
SAFETY: Maintenance-free bare wire heating system, suitable for hard and soft water. Safety system with high pressure switch.
Please ask your local power supply utility or a registered electrician to install appliances that are not fully wired, i.e. ready to plug in. The electrician should also be able to assist you with obtaining the agreement of the respective power supply utility required for the appliance installation.