• Product details

    APPLICATION: DEL Plus is suitable for supplying DHW to several draw-off points (single and group supply), e.g. simultaneous supply to bathroom and kitchen. Sealed unvented, pressure-tested appliance for use with all commercially available pressure taps.

    EQUIPMENT / CONVENIENCE: Electronically controlled instantaneous water heater with 3i technology. Accurate temperature delivery up to the maximum output. Temperature selection from 30 to 60 °C via rotary selector, temperature adjustment for showers in 0.5 °C increments (35 - 43 °C). Backlit multifunction display to show set temperature, current power consumption, status and service indication. Selectable ECO mode. Memory function for 2 programmable temperatures of choice. LED scalding risk indicator at temperatures above 43 °C or when outlet temperatures are unexpectedly high due to preheated water. Individually adjustable temperature limit (childproofing). Pivoting appliance cover and programming unit for increased operating convenience in undersink installations.

    EFFICIENCY: Saves up to 30 % energy and water by means of electronic output control with 3i technology. 3 sensors ensure that the selected temperature is accurately achieved. For this, only the actual required amount of energy is expended; there is no need to add cold water at the tap. This ensures maximum energy efficiency. ECO mode can be individually selected for particularly economical operation. Suitable for preheated water (e.g. in solar thermal and heat pump systems).

    PROFI-RAPID INSTALLATION: PROFI-RAPID – The improved installation system for even quicker and simpler installation. Easy replacement of all conventional instantaneous water heaters. Easy wall mounting: Universal mounting rail with integrated compensation for unevenness in the wall and drill hole discrepancies; matched to suit commonly used fixing points. Quick and universal water connection: Enlarged installation area with pivoting cold water inlet, threaded water fittings, twin connector technology for easy replacement, surface/flush mounting with 3-way shut-off, suitable for plastic pipes (observe manufacturer's instructions). Straightforward electrical connection: Electrical connection can be made from above or below; cable entry gland for cable. Adjustable output 18/21/24 kW in a single appliance. Protection rating IP 25 (hoseproof).

    SERVICE: Fault analysis through LED diagnostic traffic light and fault memory which can be called up on the display. Internal assembly can be removed in a single step.

    SAFETY: Rapid bare wire heating system, suitable for hard and soft water. Electronic safety concept with air bubble detection. Anti-scalding protection adjustable only by qualified contractors, for permanent limiting of the water outlet temperature to max. 43 °C.



    ERP product datasheet

    Technical datasheet

    Product Number: 236739

    Rated output: 18/21/24 kW

    Height: 466 mm

    Width: 225 mm

    Depth: 116 mm

    Show all

    Download as PDF

    Equipment datasheet